When ever we are trying to stop as much heat as possible from getting into the
cockpit there are several things we will do.
First be sure all hole in the firewall are plugged with the correct size
grommets.
Next has to be done prior to installing the harness, we will install
Dynamat
on the upper part of the firewall above the air tube.
Then install Dynamat to all surfaces that are covered by carpet, behind
the
front kick panels, inside the doors, and also cover the transmission tunnel.
Next use DynaLiner under the floor carpet and all the carpeting in the
foot
bax area.
This will take 36 sq ft of dynamat and One box of Dynaliner
David Nock
British Car Specialists
On Mar 27, 2011, at 9:01 AM, scott willis wrote:
> Hi folks,
> I am now ready to install a heat barrier. I was going to do it on the cheap
> since I will have to do this twice since my car is not restored but I
decided
> to do it right. Now I am confused as to what product to buy. Does anyone
have
> a recommendation on which Dynamat product is best for the Healey interior,
how
> much I will need to buy, and where to get it?
>
> Cheers,
>
> Scott Willis
> Mashed 60 BN7 AH Club USA
> 59 MGA
> 66 E-Type FHC
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|