Correct.
For the record, the thread on the axel nut is opposite that of the spinner.
Paul
From: michael.salter at gmail.com [mailto:michael.salter at gmail.com] On Behalf
Of Michael Salter
Sent: Wednesday, February 09, 2011 1:25 PM
To: PG
Cc: Healey List
Subject: Re: [Healeys] Rear Axle Nut
Correct the LH nut is a LH thread but note these are octagonal nuts, 8 sides
so a regular socket will not work. That is why so many are so badly
battered!!!
Michael Salter
On Tue, Feb 8, 2011 at 7:05 PM, PG <britishcars at shaw.ca> wrote:
I'm trying to remove an axle nut so as to replace the seals and bearings.
I have a 2 3/8" socket and try as I might, I can't get the nut to turn. In
fact, I've damaged the but a little trying and I'm worried about rounding
the nut and being really screwed.
I don't understand why it would be so tight or difficult to take off.
Any ideas
Paul
_______________________________________________
Healeys at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
<http://www.team.net/forums%0AUnsubscribe/Manage>
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/msalter at precisionsportscar.com
|