Gergo -
I think what matters here is that the contact between ring and pinion
is centered on the teeth. As you move the pinion, it will change the
contact face. Aren't there instructions in the shop manual for this?
Alan
On 2/10/11, Austin Healey <pajtamuvek at gmail.com> wrote:
> Hi,
>
> I have recived the final parts and tools for the differential rebuild.
> After a bit od trial I am now the pinion is 0.04mm higher. The next shim
> will bring it below the height 0.01mms. Which is better? I mean the running
> in will lower a bit the height. Or?...
>
> Gergo
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut at gmail.com
>
--
Sent from my mobile device
|