Gergo -
I think what matters here is that the contact between ring and pinion
is centered on the teeth. As you move the pinion, it will change the
contact face. Aren't there instructions in the shop manual for this?
Alan
On 2/10/11, Austin Healey <pajtamuvek@gmail.com> wrote:
> Hi,
>
> I have recived the final parts and tools for the differential rebuild.
> After a bit od trial I am now the pinion is 0.04mm higher. The next shim
> will bring it below the height 0.01mms. Which is better? I mean the running
> in will lower a bit the height. Or?...
>
> Gergo
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>
--
Sent from my mobile device
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|