For the lettering I used a white china marker. Rub the marker over the
indented lettering filling it up with the white waxy material and then rub
off the excess. Works great.
On Sat, Feb 26, 2011 at 2:48 PM, Greg Lemon <glemon@neb.rr.com> wrote:
> Only thing I will add is that I used a white latex (water based) paint for
> the lettering on the knobs, not having a very steady hand for fine detail I
> could be a little messy, then carefully wipe off the excess with a damp
> cloth (very lightly so you get the surface but is doesn't sink in to the
> indent for the letters) for a clean neat finish on the letters. I was very
> pleased with the results.
>
>
> Greg Lemon _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/m.fawcett@verizon.net
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|