In the states, mossmotors, brithiscsrspcialists, tomsimportedtoystore.
Ira Erbs
Digs 4 Solutions
Computer Consultants
Portland, OR
On Dec 3, 2010 12:13 PM, "Rich C" <richchrysler@quickclic.net> wrote:
> Further to my earlier reply (see below) I apologize for not suggesting a
> source. I purchase these items from Autofarm, here in Ontario. They should
> have all in stock and ready to ship.
>
> Rich
>
> -----Original Message-----
> From: healeys-bounces@autox.team.net [mailto:
healeys-bounces@autox.team.net]
> On Behalf Of Rich Chrysler
> Sent: Friday, December 03, 2010 12:37 PM
> To: 'Austin Healey'; healeys@autox.team.net
> Subject: Re: [Healeys] Body panels
>
> Kilmartin Automotive Sheetmetal makes the best of all these items, but you
> need to check to see if their outer sills are the correct sweeping curve,
> and not straight. Most people miss the fact that the bottom edge of the
> doors and the outer rocker panels have a sweeping compound curve to them,
> continuing from the front wing lower edge. Don't let anybody sell you
> straight ones.
> Certainly the ones marketed by AH Spares have the proper curve.
>
> Rich
>
>
> -----Original Message-----
> From: healeys-bounces@autox.team.net [mailto:
healeys-bounces@autox.team.net]
> On Behalf Of Austin Healey
> Sent: Friday, December 03, 2010 12:19 PM
> To: healeys@autox.team.net
> Subject: [Healeys] Body panels
>
> I have removed most of the parts of my new project, and would like to buy
> some body panels. Can You suggest me a good source?
>
> - floors each side
> - outter sills
> - trunk floor
>
> Thanks.
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/eyera3@gmail.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|