Further to my earlier reply (see below) I apologize for not suggesting a
source. I purchase these items from Autofarm, here in Ontario. They should
have all in stock and ready to ship.
Rich
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Rich Chrysler
Sent: Friday, December 03, 2010 12:37 PM
To: 'Austin Healey'; healeys@autox.team.net
Subject: Re: [Healeys] Body panels
Kilmartin Automotive Sheetmetal makes the best of all these items, but you
need to check to see if their outer sills are the correct sweeping curve,
and not straight. Most people miss the fact that the bottom edge of the
doors and the outer rocker panels have a sweeping compound curve to them,
continuing from the front wing lower edge. Don't let anybody sell you
straight ones.
Certainly the ones marketed by AH Spares have the proper curve.
Rich
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Austin Healey
Sent: Friday, December 03, 2010 12:19 PM
To: healeys@autox.team.net
Subject: [Healeys] Body panels
I have removed most of the parts of my new project, and would like to buy
some body panels. Can You suggest me a good source?
- floors each side
- outter sills
- trunk floor
Thanks.
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|