________________________________________
From: Tadeusz Malkiewicz [mailto:Tadeusz.Malkiewicz@plusnet.pl]
Sent: Friday, September 17, 2010 11:24 PM
To: 'Jim LeBlanc'; 'I Erbs'; 'Curt/Nancy Arndt'
Cc: 'healeys@autox.team.net'
Subject: RE: [Healeys] thickness of phenolic spacers for 100 LeMans
carburettor setup
Thatbs precisely the problem b:
When assembling the carbs I noticed that:
- the extra heat shield (I got from Denis Welch) does not fit properly
without touching the manifold unless you stack 2 phenolic washers
- even if I install just one thick phenolic washer I cannot get the cold air
box as it does not clear the knocked frame pieceb&
Itbs a bit of a catch 22 situation..
Tadek
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|