I'd be concerned about removing any metal at all from the machined surfaces
with tight clearances.
bs
On 9/17/2010 7:18 AM, Josi Vicente Vargas wrote:
> What about soda blasting ?
> It leaves them wonderful without any damage
> Josi Vicente Vargas
> Musmi
>
> Tel. (571) 321 3740
> Cel. (57) 311 288 3401
> Skype: jovivago
>
>
> www.musme.net <http://www.musme.net>
>
>
> Bogota, Colombia
>
>
>
> Do not use any caustic based cleaner.....will damage the ali.....use a carb
> cleaner....chlorinated solvent....don't spill any on your property.
>
> Paul
>
>
>
> Listers,
>
> I bought some H6 carbs (from a TR2/3 originally) on eBay for parts for my
> BN2. The carbs are intact, but they are
> pretty gunked-up. What is the List wisdom regarding cleaning up aluminium
> without scratching or deforming?
>
> TIA,
> Bob
>
--
*******************************************************************
Bob Spidell San Jose, CA bspidell@comcast.net
*******************************************************************
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|