Bob
The best stuff is the big gallon tin of GUNK Carb Cleaner. They
should sell it at NAPA:
http://www.gunk.com/prod_photo.asp?img=LG_CC3K.jpg
If you are talking about polishing, a wheel polisher works very well.
Incidentally, with the TR2 H6 carbs are different and you will need to
swap over your old H4 float chambers and choke levers.
Regards,
Alan
On Fri, Sep 17, 2010 at 7:03 AM, Bob Spidell <bspidell@comcast.net> wrote:
> Listers,
>
> I bought some H6 carbs (from a TR2/3 originally) on eBay for parts for my
> BN2. The carbs are intact, but they are pretty gunked-up. What is the
List
> wisdom regarding cleaning up aluminium without scratching or deforming?
>
> TIA,
> Bob
>
> --
> *******************************************************************
> Bob Spidell San Jose, CA bspidell@comcast.net
>
> *******************************************************************
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|
