My BJ7/8 parts book shows an adjustment screw (#27H2413) & locknut (#FNN204).
It also shows rubber stop (#17H5811). Both seem to serve the same purpose. My
BJ8 overdrive came with the adjustment screw & locknut.
Gary Hodson
-----Original Message-----
From: Jim LeBlanc jim_leblanc@yahoo.com
I recall using a brass screw without putting threads in the hole. Some
ecommend a nylon screw. As the plunger operates on magnetic pull, one does
ant to avoid steel. (I have never verified the effect of magnetism and
voided the possible research effort).
recall putting a nut on both sides of the hole giving adjustment to plunger
all.
rom: Jwhlyadv@aol.com <Jwhlyadv@aol.com>
ubject: Re: [Healeys] intermittent OD
o: rantal243@yahoo.com, healeys@autox.team.net
ate: Friday, August 27, 2010, 2:57 PM
he old timers like Malcom Terry taught us to tap the hole and run a
achine screw up through the bottom to act as a stop. Worked for me!
Jim Werner
=
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|