Olin -
You can also use a grinder or small bolt cutters, or both.
Alan
On 8/8/10, Olin Brimberry <healey@hunterbane.com> wrote:
> Thanks Dallas. I was thinking I would need a press to clip the edge.
> I have tin snips - will that get it? I assume these are 1/16"
> thickness or so.
>
> Olin
> On Aug 7, 2010, at 6:41 PM, Dallas Congleton wrote:
>
>> Olin, if you don't find them, make your own. Get some 5/16 fender
>> washers ( available in the bins at Lowes), and trim one side with
>> metal snips.
>> Dallas Congleton
>> Little Washington NC
>>
>>
>> ----- Original Message ----- From: "Olin Brimberry" <healey@hunterbane.com
>>
>> >
>> To: <healeys@autox.team.net>
>> Sent: Saturday, August 07, 2010 6:01 PM
>> Subject: [Healeys] "D" shaped washers for the fuel tank strap
>>
>>
>>> Does anyone have an extra set of 2 of these washers. I took my
>>> tank out and when putting the straps back on, I misplaced the
>>> washers. These are the 2 that are D shaped so that it will fit
>>> against the flange to the rear shoud.
>>>
>>> Thanks,
>>>
>>> Olin Brimberry
>>> Raleigh, NC
>>> _______________________________________________
>>> Healeys@autox.team.net
>>> Donate: http://www.team.net/donate.html
>>> Suggested annual donation $12.75
>>> Archive: http://www.team.net/archive
>>> Forums: http://www.team.net/forums
>>> Unsubscribe/Manage:
>>> http://autox.team.net/mailman/options/healeys/dcongleton@embarqmail.com
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
>
--
Sent from my mobile device
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|