Allen -
I suspect the difference is that the 100 latches are use BSF / BA screws
(it's mix and match if I recall) and likely the BN4 uses UNF.
Alan
'52 A90
'53 BN1
'59 Jag Mk IX
'64 BJ8
On Fri, Apr 30, 2010 at 9:37 AM, allen c miller jr <acmiller@mhcable.com>wrote:
> Is there any dimensional difference between BN!/BN2 and BN4 hood clamps.
> they
> have different part #'s and prices with Moss, but appear to be the same. I
> am
> fitting a vintage hardtop to my 100m and have to customize the mountings
> anyway, so I would be inclined to use the less expensive 100-6 hardware if
> it
> makes little difference. of particular interest is whether the later clamps
> fit to the 100-4's ball-shaped post studs. any thoughts appreciated.
>
> allen miller
> bn2/m
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|