John,
Thanks for the clarification, since I neglected to move the spreadsheet left
to see everything on the right.
That being said, and as you've stated, the list is mostly incomplete with
regard to the various Whitworth fasteners on this particular BN2. This is
exactly what Roger and I had inteneded to do and it looks like this would be
nice to have if I or someone else has the time to compile the data.
Cheers,
Curt
On Wed, Mar 31, 2010 at 12:56 PM, John Sims <ahbn6@verizon.net> wrote:
> *This particular spread sheet was sent to me by one of our friends in
> Europe (I forget who) with an indication that it would be updated at a
> future date. As far as your example is concerned, the spread sheet, shows
> that the Nuts for studs part number 2K3975 are 1/4 BSF. Browsing down the
> list I see that this same part number was used for nuts on different parts
> of the car which would make sense to me. Engine mounting bracket uses Hex
> screws part HZS0608 which is shown as a 3/8 USF one inch long zinc bolt.
> Etc.*
>
> * *
>
> *This list was compiled for a BN2 and is by no means complete but I doubt
> if the part numbers were different for the same fastener in the other
> models. But, not to disparage the English, one never knows.*
>
> * *
>
> *In any event, if the person who gave this to me is still monitoring the
> list, hopefully he will have made additions.*
>
> * *
>
> *John Sims, BN6*
>
> Aberdeen, NJ
>
>
>
> http://www.healey6.com
>
> * *
>
> *From:* Curt/Nancy Arndt [mailto:cnaarndt@gmail.com]
> *Sent:* Wednesday, March 31, 2010 2:37 PM
> *To:* John Sims
> *Cc:* Alan Seigrist; Healey; John Harper
> *Subject:* Re: [Healeys] BSF / BA Bolts - Austin Number Converter
>
>
>
> John,
>
> Nice chart, but which model Healey are they for?
>
> Plus we all know the BMC coding for UNF Fasteners, but this is NOT what
> Alan needs. What he needs is someone to do a spreadsheet showing the size
> and thread of BSF, BSW, BSP or BA fasteners as they correspond to the BMC
> part numbers in the parts book. This is a project that Roger Moment and I
> have talked about doing for some years now but haven't gotten around to
> doing it yet.
>
> For example, my 100 Parts books lists the three (3) nuts that hold the
> "Front Cover for Water Gallery" and the four (4) "Nuts for studs" on the
> carburetor "Balance pipe" as *2K 3975*. It would be nice to know that
> this part number corresponds to a 1/4 BSF standard nut.
>
> I may already have some if this info, I just need to research and find it
> and then I'll publish it on the list.
>
> Cheers,
>
> Curt
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|