yes I have a hotter than stock cam. Thanks, i was concerned about the air
filter situation. Yes all throttle linkage is available for both the
tri-carb and HD8 set ups
On Wed, Mar 17, 2010 at 10:37 AM, <warthodson@aol.com> wrote:
> If possible, make sure you get all the throttle & choke linkage & the air
> cleaners. I think you said you are getting the intake manifold with the
> carbs. Do you have a cam equal to the BJ8 cam?
> The angled chassis support that goes from the frame near the front
> suspension to the pedal box will need to be modified to clear the HD8 air
> cleaners.
> Gary Hodson
>
>
> -----Original Message-----
> From: I Erbs <eyera3@gmail.com>
> To: healey help <healeys@autox.team.net>
> Sent: Wed, Mar 17, 2010 10:28 am
> Subject: [Healeys] follow up question about carbs
>
> If I go with the BJ8 set up will there be an issue with port sizes? by that
> i mean, will the 2" manifolds match the intake port size or will there be a
> step down? I do not want to pull the head and open up the ports. If a
> mismatch, what will the effect be? Obviously more turbulence, but will it be
> enough to negatively impact induction?
>
> Thanks,
>
> --
> I Erbs
> Portland, OR
> _______________________________________________
> Healeys@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Unsubscribe/Manage:
>http://autox.team.net/mailman/options/healeys/warthodson@aol.com
>
>
--
I Erbs
Portland, OR
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|