You can actually drill a hole only in the backing plate and route the hose
through. On the other side you insert a loose piece of pipe into the hose,
which will keep the hose in place.
Magnus Karlsson
Bores Motor Corporation AB
Husbondegatan 36B
507 60 Bores
Phone +46-703-933349
www.concourshealeys.com
14 mar 2010 kl. 21.55 skrev john gillespie:
> Hello Bob and others, two of us in the NE region that owned BJ8's had K
and
> N filters installed. We had a hole drilled and then a small pipe welded
onto
> the backing plate. This pipe did clear the dashpots and we were able to
> connect the breather hose. The plates that we had were made out of
aluminum
> so you have to get a welder that knows how to handle that type of material.
> John
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|