--------------------------------------------------
From: "Rich C" <richchrysler@quickclic.net>
Thomas, et al,
I just took two measurements on a stock Hundred engine and have found the
following:
- total depth of stock undamaged oil pan 5 3/16" or 13.3 CM
- length from bottom of oil sump to top of dipstick tube 13 3/4" or 35 CM
Hope this helps,
Rich Chrysler
--------------------------------------------------
> From: "T+ B Willig" <willig@wtnet.de>
>
>> Rich,
>>
>> the sump for the hundred came exactly with the same instructions. In view
>> of
>> this I am afraid to fill the same amount of oil as used for the steel
>> sump
>> into the alu sump.
>>
>> The question is, what is the actual oil level in the steel sump in
>> comparison to the bottom of the block?
>>
>> Maybe someone with a steel sump could measure the distance from the
>> bottom
>> of the sump to the end of the dipstick tube?
>>
>> Regards
>>
>>
>> Thomas
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|