Hi Allen,
Have you tried Medina Motorsports (http://www.medinamotorsports.com/) or
800-700-7057. I believe my pistons came from Bob Yule at AutoFarm
(http://www.autofarm.net/autofarm/home.aspx) up in Canada. There's also Custom
Pistons (http://cppistons.com/) Or JE Pistons (http://www.jepistons.com/)
Do a Google search on custom pistons and a slew of sites come up.
Hope this helps.
Cheers,
Carlos
________________________________
From: allen c miller jr <acmiller@mhcable.com>
To: Healey List <healeys@autox.team.net>
Sent: Sun, March 7, 2010 6:31:18 AM
Subject: [Healeys] 100-4 flat top pistons (10:1)
Am building race engine for Pocono (April 11th) and have run against snag.
Dennis Welch Motorsports is back ordered 4-6 wks on the flat top 88mm pistons,
which requires my sourcing a set of racing pistons elsewhere. if anyone on the
list has had a custom set fabricated by JE Pistons or a similar piston maker, i
would appreciate the specs and/or order # so i could piggyback off the design
specs? am sticking with the stock wrist pins (floating in piston, clenched to
con rod).
alternately, if anyone knows of a set for sale somewhere, would be very
interested.
also interested in speaking with anyone with experience
engine is otherwise in the works, and i am loathe to use my existing set of
0.20" over M-spec (shallow dish) pistons a stopgap measure, since it means
building a second short block for a single season's use.
also could use input from anyone with information as to locations and depths
for valve relief pockets.
thanks.
allen miller
bn2-m _______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/healeys/healey3000bn7@yahoo.com
_______________________________________________
Healeys@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|