My positive ground BJ8 has been using Pertronix for 8 or 9 years.
---- "rrengineer @dslextreme.com" <rrengineer@dslextreme.com> wrote:
=============
They DO have positive ground Pertronix units. Let's not confuse the masses
with statements like: No Pertronix until changed to neg ground! My Bugeye
is Positive ground with a rebuilt Advanced Distributors unit that Jeff
installed the Pertronix unit during the rebuild for me. Also using a solid
state voltage regulator. Works better at directing electricity using a
generator. It will make the generator last longer. Email
bobj50@camcast.net for further info. Here is the article by Bob Jeffers on
converting your voltage regulator: *http://tinyurl.com/yb8m6ws*
I also have converted the box for the BN2. No financial interest, just a
very satisfied customer.
Mike MacLean
60 Sprite
56 BN2
On Tue, Nov 17, 2009 at 8:01 PM, Alan Seigrist <healey.nut@gmail.com> wrote:
> Scott -
>
> If you weren't putting in Pertronix you could get away with that procedure,
> but with Pertronix you also must make sure the coil leads are reversed
> (double check them against the Pertronix diagram) otherwise you'll blow out
> your Pertronix unit.
>
> Alan
>
> '52 A90
> '53 BN1
> '59 Jag Mk IX
> '64 BJ8
>
>
> On Wed, Nov 18, 2009 at 10:14 AM, <RAWDAWGS@aol.com> wrote:
>
> > I have rebuilt the engine on my Longbridge BN4(thank you, Richard Mayor)
> > Tonite I turned the engine over and have good oil pressure and flow. I
> > would
> > really like to to start the beast. I figured that I should go ahead and
> > switch to modern ignition, starter and fuel pump . I am thinking I will
> > start
> > the car with the generator, but because I am planning to eventually go
> > to an alternator, I ordered a negative ground pertronics. My thinking is
> I
> > can just change out my fuel pump and polarize the generator and get her
> > started. My understanding of the process is that you switch battery
> cables
> > and
> > turn on the ignition and quickly short the A and F connections on the
> > voltage regulator. Sounds like magic. Is it really that easy? How do I
> > know if
> > it "took"? I have a negative ground pertronics how should I hook it up
> to
> > the coil? Anyway I can fry the Pertronics? Blow up my garage? Thanks,
> > Scott
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as rrengineer@dslextreme.com
>
> http://www.team.net/archive
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
You are subscribed as tomfelts@windstream.net
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|