One great use of the super long knock of spanner is to move the car in
gear when adjusting the valves. Very helpful. Great little tool.
On 8/27/09, Peter Ryner <pryner@verizon.net> wrote:
> I stopped using hammers several years ago. I have two wrenches I use - the
> first is a commercial one I got from either TRF or Moss, can't remember. It
> is metal and fits over the ears and is about 3' long. I always use a towel
> or rag around the ear where the metal touches and it works great. No more
> banging and messing up the ears and it gets the knockoff very tight. To
> loosen I leave the tire on the ground and the tool always gets the knockoff
> loose.
>
> The other is plywood I made from a pattern from one of my many LBC
> magazines. It is much like the commercial one except you use the knockoff
> as a template and cut a hole in the plywood to match the knockoff. When you
> cut the plywood just leave a 3' long handle attached to the knockoff
> template. I used 2 pieces of 3/4" plywood which makes it very strong and
> thick enough to grab the knockoff and turn it. Both work very well.
> Pete
> ----- Original Message -----
> From: <healeymanjim@hansencc.net>
> To: <healeys@autox.team.net>
> Sent: Thursday, August 27, 2009 10:43 AM
> Subject: [Healeys] knockoffs
>
>
>>i have noticed that the knockoffs made in the last few years must be of a
>>softer brass than the old style. i never use anything but a copper or lead
>>
>>hammer on knockoffs and it seems the new ones tend to flatten slightly on
>>the ends. my old original knockoff that i had rechromed in germany in the
>>80s are still as new with no flattening anywhere. anyone else notice this.
>>
>>i also have started using the large deadblow hammer from harbor freight on
>>the new hubs and it seems to work much better as far as keeping them in
>>shape. hjim
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>>
>> Healeys@autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> You are subscribed as pryner@verizon.net
>>
>> http://www.team.net/archive
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut@gmail.com
>
> http://www.team.net/archive
>
--
Alan
'52 A90
'53 BN1
'64 BJ8
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|