Hi Steve-
What worked for me was to fish a wire theough, and then secure it to the
harness by wrapping it a few times around and back on itself. Then masking tape
the whole bugger tightly, so it is smooth and there are no exposed ears hanging
out. The masking tape's smooth finish helps it glide through, and the residual
oil in the tube helps lube it (and will help the tape to release.
Good luck. Tom
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|