Hi all,
During my restoration, a few years ago I removed my
trafficator harness and now that my steering wheel is restored I've been
trying to reinstall the trafficator harness. I should mention that the
original bullets are still soldered on the ends. I've tried running
bailing wire up the tube and pulling the harness back through but it
gets jammed up at the opening. So I tried heavy duty fishing line but
the second or third bullet just gets jammed and am wondering if anyone
has successfully reinstalled the trafficator with the bullets still on
and if so, how did you do it or do I need to cut off the bullets and
pull it through and then solder new ones on? I wanted to avoid the
latter if possible but if not, oh well.
As always many thanks,
Steve Meyer
61 BN7
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|