healeys
[Top] [All Lists]

Re: [Healeys] BJ8 wheel knock-off tightening

To: <dgschwind@comcast.net>, <healeys@autox.team.net>
Subject: Re: [Healeys] BJ8 wheel knock-off tightening
From: "Greg Lemon" <glemon@neb.rr.com>
Date: Tue, 19 May 2009 19:10:27 -0500
Is important to lube your splines, though not as important on a sheltered 
collector car as on a daily driver, I acquired an MGB many years ago upon 
which this had not been done and much swearing and application of brute 
force as well as consumption of soothing beverages was needed to pursuade 
wheel from hub.

Bearing grease is often suggested, I find that it tends to leak out onto the 
spokes from centrifugal force when it gets hot on the highway, I have used 
anti-sieze compound with good results and less mess.

As far as taking the knock offs off that is more a function of how hard they 
were whacked on than any grease used or not used, but still a good idea to 
lube these as well.

Greg Lemon 
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>