Raise the front as high as you want then slip the floor jack under the
differential from in front of the rear wheel on the side opposite the muffler
(passenger side for L/H drive cars).
Removal of floor jacks is the reverse.
bs
robert westcott wrote:
> I agree but use a floor jack and get the front up just high enough to
> get the jacks under the frame or suspension, then do the same at the
> rear. If you need it higher, repeat the process. If you raise the
> front too high you can't get the jack under the rear.
>
> Rob
--
*******************************************************************
Bob Spidell San Jose, CA bspidell@comcast.net
*******************************************************************
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|