Take a look at my site in the Miscellaneous section of the Technical page in
which there is an article that I wrote for Healey Marque magazine which
shows the method that I use to raise my car onto four jack stands.
John Sims, BN6
Aberdeen, NJ
http://www.healey6.com
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of robert westcott
Sent: Tuesday, May 12, 2009 12:27 AM
To: healeys@autox.team.net
Subject: Re: [Healeys] Getting Healey off the ground
I agree but use a floor jack and get the front up just high enough to
get the jacks under the frame or suspension, then do the same at the
rear. If you need it higher, repeat the process. If you raise the
front too high you can't get the jack under the rear.
Rob
'55 BN1
On May 10, 2009, at 1:00 PM, Michael Hartfield wrote:
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|