Sirs,
Like Don Newman, I know the history of My car. I bought it from the
original owner forty years ago so I know the fasteners in the boot are
the original hardware. They are Pozidrive. I guess that means the
Concours Committee has relaxed the requirement and will accept a look-
alike Phillips head???
Marks3
On Apr 2, 2009, at 11:33 AM, DENewman2@aol.com wrote:
> I also checked my car this morning. Pozidrive 1/2 ".
> I am the original owner so I am sure that is how the car came from
> the factory.
>
> Don
>
> In a message dated 4/2/2009 11:08:40 A.M. Pacific Daylight Time,
>mandmschneider@comcast.net
> writes:
> Sirs,
>
> I just went to the garage to check. The fasteners in my boot are
> Pozidrive button head screws. The heads are approximately 5 mm in
> diameter. I didn't extract any to measure the length but I recall
> they are not very long. They are definitely not Philips head screws
> and they are the original Pozidrive screws that were put in the car at
> the time of manufacture. Whenever possible I have reused the same
> fasteners in the same application as original construction. If you
> need more detail, eg, size and thread type, please let me know.
>
> Marks3
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as denewman2@aol.com
>
> http://www.team.net/archive
>
> Feeling the pinch at the grocery store? Make dinner for $10 or less.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|