healeys
[Top] [All Lists]

Re: [Healeys] Location of flasher unit on BN2 ...

To: "healeylist" <healeys@autox.team.net>, "Bob Spidell" <bspidell@comcast.net>
Subject: Re: [Healeys] Location of flasher unit on BN2 ...
From: "Rich C" <richchrysler@quickclic.net>
Date: Thu, 19 Mar 2009 00:29:16 -0400
Bob,

The flasher can on a BN2 mounts inside the car and has a mounting tab on the 
top which fastens over the end of a 1/4" NF machine screw whose head is in 
the engine bay, the shank is inside the car. The wires come from the main 
harness in the engine bay, through the same grommet as the 3 wiper motor 
wires, arriving right adjacent to the base terminals of the flasher can. 
It's a whole lot easier to install all this stuff before the front shroud is 
final fitted to the car. Picture att'd of original BN2 showing undisturbed 
details before dismantling. Shroud has just been removed.

Rich Chrysler

----- Original Message ----- 
From: "Bob Spidell" <bspidell@comcast.net>
To: "healeylist" <healeys@autox.team.net>
Sent: Wednesday, March 18, 2009 11:52 PM
Subject: [Healeys] Location of flasher unit on BN2 ...


> ... inside or outside of firewall, and attached to?
>
> TIA,
> Bob

[demime 1.01d removed an attachment of type image/jpeg which had a name of 
scan0007.jpg]
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>