Doug -
On the speedo, the wires on the back (1 red + white and 1 green +
something or other) simply pull out the back with the bulb holders.
The red and white wire should just pop out the back, the green wired
bulb holder sometimes gets stuck- don't pull too hard you might break
the bakelight fitting on the back of the speedo.
Alan
On 3/17/09, Ashbrook, Doug (NIH/CIT) [E] <ashbrook@mail.nih.gov> wrote:
> I need to send the speedometer for my 67 BJ8 in for repair. I was able to
> remove it except for the 2 wires, which I assume are for the panel lights.
> I
> am unable to figure out how to remove those wires. Can anyone tell me how
> to
> do it? Thanks.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut@gmail.com
>
> http://www.team.net/archive
>
--
Sent from my mobile device
Alan
'52 A90
'53 BN1
'64 BJ8
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|