Hello Rich,
The only supplier I found who lists them is SC-Parts/Limora in the UK.
Here is the link:
http://www.scparts.co.uk/index/lang-2/lkz-195/markenid-1/katnr-1/kat_sprache-
2/hrubnr-12/rubrik-61/index.php?tpl=clickable_vertikal.tpl&teil=23&kat_id=937
9&artikelnr=205243&artikeldetailtop=120
Josef Eckert
Konigswinter / GERMANY
-----Urspr|ngliche Nachricht-----
Von: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net] Im
Auftrag von Rich C
Gesendet: Donnerstag, 26. Februar 2009 15:24
An: Healeys
Betreff: [Healeys] Spiral Bevel Diff Gasket
Hello all,
I'm continuing work on this early series spiral bevel rear axle for a July '54
BN1. Thanks to Mike Salter for directing me to some excellent shims of the
right size for the crown pinion end float, available from Spaenaur, the
excellent fastener supply house in Kitchener, Ontario.
Now everything's going back together and I suddenly discover there doesn't
seem to be a diff gasket available. That's the big round one that would seal
the diff body casting to the axle case.
I find this rather strange, as some 6000 or so BN1's and the 100S used this
axle, and the 4 bolt hub gasket is readily available.
Any leads to finding this diff gasket, anybody?
Rich Chrysler
__________________
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|