Gary,
I ran into the same problem when reinstalling mine. I found they fit
much better with the cable below the gear box.
Cheers,
John
BJ7
Warthodson@aol.com wrote:
> John, et all,
> I am referring to the two gear boxes that pass thru the shroud and the
> wiper arms atttach to them, not the gear in the motor assembly. The
> parts book indicates that the cable is above the gear, but I would
> like to verify this because I am helping a friend re-assemble a BJ7 &
> his is a very tight fit when oriented this way, perhaps because the
> tubing around the cable was badly bent. It seems to fit slightly
> better with the cable below the gear.
> Thanks,
> Gary
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|