healeys
[Top] [All Lists]

Re: [Healeys] wiper gear box

To: loftusdesign@cox.net, healeys@autox.team.net
Subject: Re: [Healeys] wiper gear box
From: Warthodson@aol.com
Date: Tue, 10 Feb 2009 10:24:30 EST
John, et all,
I am referring to the two gear boxes that pass thru the shroud and the  wiper 
arms atttach to them, not the gear in the motor assembly. The parts  book 
indicates that the cable is above the gear, but I would like to verify this  
because I am helping a friend re-assemble a BJ7 & his is a very tight fit  when 
oriented this way, perhaps because the tubing around the cable was badly  bent. 
It seems to fit slightly better with the cable below the gear.
Thanks,
Gary
 
 
 
In a message dated 2/9/2009 10:04:14 A.M. Central Standard Time,  
loftusdesign@cox.net writes:

Gary,

The Gear is below the cable. Here's a few pictures to show  the assembly  ..

http://www.loftusdesign.net/wiper3.jpg
http://www.loftusdesign.net/wiper4.jpg
http://www.loftusdesign.net/wiper5.jpg

Cheers,
John

-----------------

When  correctly installed, is the gear (in the gear box) above or below  the  
actuating cable (on a BJ7)?

Gary  



**************A Good Credit Score is 700 or Above. See yours in just 2 easy 
steps! 
(http://pr.atwola.com/promoclk/100000075x1218550342x1201216770/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072%26hmpgID=62%26bcd=fe
bemailfooterNO62)
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>