Fellow Healeyoids,
I'm still working on the alternator conversion kit and I'm
having a difficult time figuring out the wiring.
I have a GM Delco Alternator from NAPA.
The wiring across the front of the regulator was as follows:
A1: Brown Fat wire
A: Brown/Blue Fat wire and a Brown skinny wire.
F: Yellow/Green Skinny wire, this went to the F on Generator.
D: Yellow Fat wire and yellow Skinny the yellow Fat wire went to the D on
the Generator.
E: Black Fat ground.
I put all of the brown wires (3) together and hooked to the positive on the
alternator.
I put all of the yellow wires (3) together and hooked to the white of the
alternator.
Then I tried all of the three brown wires and none of the yellow wires.
I got the car to start, but then it died and no power at all after 5
seconds.
Also, My fan belt it loose and just spins even when the alt. is all the way
tight. Maybe I need a different size belt.
Thanks in advance!
Randy
Healey Archaeologist
63 BJ7
60 BT7
66 Cobra replica
06 Mini Cooper S
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|