Rich
Were the brackets for the left and right hand cars different, my left hand car
(converting to right) had a triangle shaped L bracket, the single screw into
the box section (not the 2 screws as you describe) with the large triangle
part with the 2 screw holes going under the glovebox liner. It was fixed with
2 small self tapping screw with the heads inside the glovebox, it looked
factory fit? Heres a pic:
http://www.austin-healey3000.com/apps/photos/photo.jsp?photoID=5122307&prev=1
thanks Bob and Rich for the handbrake answer
cheers Andy> Wes,> Straight behind (or rather in front of) the deepest part of
the glove box > interior liner, there should be two small screws holes near
the bottom of > the scuttle box section. A simple L bracket screws onto the
scuttle box > section and extends back from this mounting point to a single
screw with > flats and nut into the bottom end of the inerior liner.> > Rich
Chrysler
_________________________________________________________________
Cut through the jargon: find a PC for your needs.
http://clk.atdmt.com/UKM/go/130777504/direct/01/
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|