Peter
I have to make some assumptions about the exact detail but I would have
thought that there was no way that this would work. The BN1 stub axles
have smaller diameter bearing areas. This all changed with the BN2 where
heavier stub axles were introduced. These heavier ones started life on
the A90 Westminster. I am not sure about BJ8 hubs but they are likely to
be the same or similar to the BN2 versions. Others who read this will
have to add more accurate details.
The BN1 had inclined ball race bearings. Later ones had taper roller.
Regards
>
>One of our Queensland members is looking at putting BJ8 disc brakes on a BN1.
>He has "authoritative advice" (I won't say where from!) that he can put the
>BJ8 hubs on the BN1 stub axles, but wants to be sure before he presses in the
>bearings. What's the word on this?
>
>Cheers
>
>Peter Linn
--
John Harper
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|