Instead of propane use MAPP gas in the yellow bottle. It puts out 80%
more heat than propane and works wonders over any of the lubricants.
Removed many bolts on my 59' John Deere 630 that would have broke
otherwise.
Don
57' BN4
-----Original Message-----
From: healeys-bounces+don=anglesey.us@autox.team.net
[mailto:healeys-bounces+don=anglesey.us@autox.team.net] On Behalf Of
grantlyon@myway.com
Sent: Monday, September 15, 2008 5:50 AM
To: healeys@autox.team.net
Subject: [Healeys] Stuck water outlet cover, remove with Dremel? '60
3000
My water outlet fitting is stuck on the inboard stud. The outboard boss
(towards the front of the car) is loose.
The cover/boss is resistant to my attempts with PB Blaster and propane
torch
treatment.
Any recommendations on how to remove?
Is the original part worth trying to save even if part of the outlet lip
is
badly corroded?
I'm ready to hack at it with Demel tool disc and carbide bits. I have
the Moss
reproduction part.
------------------------------------------------------------
Business Plan
Chart your path to success with a smart new business plan. Click here!
http://216.21.215.31/fc/JkJQPThSvbhwSBXBaM66xh6x72mnXO0nPejMcXcEnIUyftAy
OUHCn
u/
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
You are subscribed as don@anglesey.us
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|