Kenny,
You need to check that the thrust washer at the back of the overdrive case
has not slipped out of place. Also, check that the splines on the various
pieces back there line up. One other possibility is that the overdrive pump
may be hanging up on the pump drive cam. I usually have to push down on the
pump a bit with a screw driver to insure that it clears the cam.
HTH,
Peter Schauss
1963 BJ7
1980 MGB
> -----Original Message-----
> From: healeys-bounces+schauss=worldnet.att.net@autox.team.net
> [mailto:healeys-bounces+schauss=worldnet.att.net@autox.team.net] On Behalf
> Of Kenny J
> Sent: Tuesday, September 02, 2008 5:02 PM
> To: Healeys Healeys
> Subject: [Healeys] O/D Installation
>
> Hey List,
>
> I am attempting to reinstall my O/D onto the gearbox. It slides on pretty
> easily until I get within the stud length (the last 1/2 - 3/4 inches) the
> O/D
> will not slide any further. Please Help. Thanks
>
> Kenny
> 61 BT-7
> _________________________________________________________________
> Get thousands of games on your PC, your mobile phone, and the web with
> Windows..
> http://clk.atdmt.com/MRT/go/108588800/direct/01/
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as schauss@worldnet.att.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|