Phil,
If you don't have the throttle switch it would be best to either:
1. use the clutch each time you disengage o/d, or
2. keep your foot somewhat into the throttle so the revs will be there to
meet the disengagement.
DO NOT lift off the throttle when disengaging.
Rich Chrysler
----- Original Message -----
From: <philritten@aol.com>
To: <healeys@autox.team.net>
Sent: Thursday, July 17, 2008 10:41 AM
Subject: Re: [Healeys] Question for Shop Owners / Restorers Only - OD
Throttle
> All,
>
> I'm not sure if I understood correctly what the best thing to do is for
> those of us (probably only me) that don't have the O/D relay.
>
> Should I
> 1) depress the clutch before flipping the switch (both in and out) as
> though I was going into another gear
> 2) lift off the accelerator before flipping the switch
>
> Thanks,
> Phil
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|