-----Original Message-----
From: philritten@aol.com
To: healeys@autox.team.net
Sent: Mon, 14 Jul 2008 8:26 pm
Subject: Re: [Healeys] Missfire followup 1
Thank you all for your input. I bought a plug socket (I was using a regular
deep walled socket before) and it gave enough clearance to get #6 off. A couple
of the center shafts came out of the plugs when I removed them. I pulled the
slightly used plugs, cap, rotor from my project Healey and put them on and it
seems to be working fine. I still hear the puffing noise, and am still getting
pinging under hard acceleration. Hopefully, tweaking the timing will help get
rid of the pinging.
?
If I'm looking over the radiator to check the timing, BTC is right of mark
correct? There is only one mark, not multiple marks like on some cars how do I
judge 10 BTC?
Thanks again!
!
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|