healeys
[Top] [All Lists]

Re: [Healeys] Replacement Radiator Fan

To: <tomfelts@windstream.net>, "Freese, Ken"
Subject: Re: [Healeys] Replacement Radiator Fan
From: bspidell@comcast.net (Bob Spidell)
Date: Mon, 07 Jul 2008 18:52:31 +0000
Or you're deaf.


;)


bs


--
***************************************************************
Bob Spidell         San Jose, CA        bspidell@comcast.net
'67 Austin-Healey 3000             '56 Austin-Healey 100M
***************************************************************

 -------------- Original message ----------------------
From: <tomfelts@windstream.net>
> I hear all this talk about the noise the 6 bladed steel blade makes.  I have 
> such, and have yet to hear the "noise".  Guess I'm lucky.
> 
> tom 
> > 
> > From: "Freese, Ken" <Kendall.Freese@Aerojet.com>
> > Date: 2008/07/07 Mon PM 12:31:02 EDT
> > To: "Ron Fine" <RonFineEsq@earthlink.net>,  <healeys@autox.team.net>
> > Subject: Re: [Healeys] Replacement Radiator Fan
> > 
> > Ron,
> > A couple of months back, I made available to the list pictures of the
> > plastic and steel fans showing the pitch. I removed the 6 blade steel
> > and installed a 5 blade steel from a 60's Mustang. I was hoping to cut
> > down on the noise of the 6 blade steel, but it did so slightly. Next
> > opportunity, I will try the 5 blade plastic Welch fan. If not satisfied
> > with that, I will go back to my old small diameter 5 blade steel fan
> > which I was satisfied with.
> > Ken Freese
> > 65 BJ8
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>