Hi Gary; Here is an article I did back in the 90's about replacing the
rubber wiper blade. It may be of some help.
--Scott Morris; Simcoe, Ontario, Canada; '60 MkI BN7 & '62 MkII BT7
J. Scott Morris - Keep Smiling, Murphy Lives
--- On Sun, 4/20/08, Warthodson@aol.com <Warthodson@aol.com> wrote:
From: Warthodson@aol.com <Warthodson@aol.com>
Subject: [Healeys] wiper blades
To: healeys@autox.team.net
Received: Sunday, April 20, 2008, 1:35 PM
Can someone recommend a source for good quality wiper blades for a BJ8? The
originals were Approx. 9" long (the rubber blade part). I bought a set
from
Victoria British that are 10" long. The length is O.K., but they are
incredibly stiff & will not conform to the curvature of the windshield. I
checked the
archives & found a lot of discussion about using RainX but nothing about
wiper blade sources.
Thanks,
Gary Hodson
**************Need a new ride? Check out the largest site for U.S. used car
listings at AOL Autos.
(http://autos.aol.com/used?NCID=aolcmp00300000002851)
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
You are subscribed as jstmorris@yahoo.com
http://www.team.net/archive
_________________________________________________________________
[demime 1.01d removed an attachment of type application/pdf which had a name of
Wiper Blade-rubber replacement.pdf]
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|