healeys
[Top] [All Lists]

Re: [Healeys] tach cable issue?

To: "Jerry Costanzo" <grumpyinloomis@ssctv.net>,
Subject: Re: [Healeys] tach cable issue?
From: "John Snyder" <helyjohn@cablespeed.com>
Date: Mon, 21 Apr 2008 09:25:44 -0800
Margaret at MOMA sent me a drawing showing that only 1/16" should stick out 
beyond the "nut" when the nut is pulled out as far as it will go.

John Snyder


> My tach quit about a few months ago.  I noted that the cable at that time 
> was
> still spinning so I sent the tach to MOMA for repair.  She did not note
> anything wrong, but cleaned it.  I put it back in and it quit again in two
> weeks but this time the cable broke.   I put in a new cable and it was 
> making
> some noise on the way to the Chico car show so I put my hand back there to
> adjust the bends in the cable.  The entry point to the tach was very hot, 
> so I
> disconnected the cable.   Are the MOSS supplied cables a little long at 
> the
> tips?  Perhaps that extra length is causing too much friction?
>
> Jerry
> BN4
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>