Charlie,
I had Chutch Net build my disk. You can specify the
diameter and spline offset then pick from several hubs
and friction materials. I have had my Smitty kit
installed for almost 8 years now. I drive the car
hard. I burned the standard Toyota disk (slight
slipping under hard 1-2,2-3 shifts. Had to resurface
the flywheel and installed a new pressure plate.
Happened again.
In discussions with Smitty, he had a custom clutch
built that was larger and thicker. Unfortunatly the
hub spring plate fractured... I eventually understood
that I needed to get my own clutch built and contacted
Clutchnet. They are fast and inexpensive. It is just
a little hard to communicate with them. Call them.
Write down exactly what you want, then put your old
disk and the instructions in the mail. In less then a
week you new disk will arrive. Be clear.
I also used them for my Lotus (Zetec/Renault
transaxle), and they had the unusual Renault splined
hub in stock. I was amazed.
Their contact info is found at clutchnet.com.
Dean Healey BN7 (installing new master cylinders and
carb jet diaphrams today)
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|