How much weight does the Por-15 add to the total frame?? That's tough
stuff. Sounds like it's better to get the whole thing sand blasted then
replace the frame, any comments on a Jules frame verse a Kilmartin??
When it's all said and done looks like about
the same cost.
-----Original Message-----
From: healeys-bounces+todd.s.taylor=lmco.com@autox.team.net
[mailto:healeys-bounces+todd.s.taylor=lmco.com@autox.team.net] On Behalf
Of richard mayor
Sent: Tuesday, January 22, 2008 10:40 PM
To: healeys@autox.team.net
Subject: Re: [Healeys] FW: Dip/Strip/Sandblast AH Chassis
Hi Guys, What is POR-15 and what is Chassis Coat? Never heard of this
stuff before. I am preparing a chassis for stripping and trying to
decide which way to go. Thanks, Richard > POR15 has a "Tie-Coat" that
acts as a paintable barrier over the POR15 > itself. Apply the Tie-Coat
and then paint over it with whatever color you > want.> > JR> -----
Original Message ----- > From:
"Jody Kerr" <jodyfkerr@gmail.com>> To: "Mark and Kathy"
<mgtrcars@galaxyinternet.net>> Cc: "Brashear, Jack, N"
<JNBrashear@garverengineers.com>; > <healeys@autox.team.net>> Sent:
Tuesday, January 22, 2008 7:31 PM> Subject: Re: [Healeys] FW:
Dip/Strip/Sandblast AH
Chassis> > > > Chassis coat comes in black, silver and white if I
Chassis> > > > remember
correctly.> > It's used as a cover layer to protect the POR-15 from UV
Light.>
>> > If it isn't a "proper" colour you can paint over it. Normally, if>
>> > >
there's a specific colour I'm trying to hit I spray with white chassis>
> coat as if it were a primer and then do my regular paint over top.> >>
> Jody> >>
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|