Does chassis coat come in Healey colors?
Mark
----- Original Message -----
From: "Jody Kerr" <jodyfkerr@gmail.com>
To: "Brashear, Jack, N" <JNBrashear@garverengineers.com>
Cc: <healeys@autox.team.net>
Sent: Tuesday, January 22, 2008 11:41 AM
Subject: Re: [Healeys] FW: Dip/Strip/Sandblast AH Chassis
> Jack et al,
>
> I'd like to add two caveats to the sandblasting method (which is the
> method I prefer btw).
>
> The media chosen will impact how the metal can be treated afterwards.
> If silica sand is used then you cannot powder coat the metal as the
> silica is embedded in the metal and causes the failure of the powder
> coating material.
>
> Additionally, if there's undercoating/excessive grease/road tar/etc on
> the metal you'll have a much faster/more successful process if you
> scrape as much as possible off before hand. It's an onerous process,
> but a little heat (heat gun/propane torch) and a putty knife will
> strip the good relatively quickly.
>
> If you're painting, there's no issues. My recipe for success is
> scraping, media blasting, POR-15 & Chassis Coat.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as mgtrcars@galaxyinternet.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|