Hello Charlie Frazer, Ed at Just Brits and all others wanting Brake Reservoir
Lettering - My supply is exhausted - Ed wants 10 and Charlie Frazer sent $ for
5 but I only have 10 left - I will sent 4 to Ed and 4 to Charlie + left over
$. If I receive email requests for 50 more, I will have more printed - Stop
sending SASEs with $. I'll keep you posted. Thanks for the overwhelming
response - I would have ordered 500 originially if I had know there was such a
demand, since once it is set up the printing cost is negligible.
Richard Bittmann
BJ7 Tacoma
----- Original Message -----
From: "Charlie Frazer" <cfrazer@jcomm.uoregon.edu>
To: "Richard Bittmann" <edmyed@harbornet.com>
Sent: Saturday, December 29, 2007 6:53 PM
Subject: Re: [Healeys] Brake Reservoir Lettering
> Richard,
> Thank you very much for sharing the fruit of your efforts.
> On Friday I mailed you $5 for some decals but later regretted not
> including other contact information in case it was necessary. You
> should receive my letter early in the week, but additional contact info
> appears below, if necessary.
> Again, thank you for sharing your resource.
> Sincerely,
> Charlie Frazer
> cfrazer@uoregon.edu
> 541 345-1694
> Eugene, OR 97403
>
> On Dec 20, 2007, at 5:28 PM, Richard Bittmann wrote:
>
> Gary and the list,
>
> I had 100ea "CLUTCH BRAKE" decals made which are
> self
> adhesive and concourse correct at a company called Lazer Trends in
> Tacoma,
> WA. I have 42 left of which I'll save 12 for "gifts". That leaves 30
> sets
> for whoever wants them for $1 ea. Just drop $1 bill and a self
> addressed
> envelope into an envelope addressed to:
>
> Richard Bittmann
> 3320 North 35th Street
> Tacoma, WA 98407
>
> and I will mail it back to you. I hope I don't get more than 30 (or
> 42)
> replys. Happy Holidays
>
> Richard Bittmann
> BJ7 Tacoma
>
> ps I hope this isn't a social faux pax and banned by the list. If so,
> please ignore.
>
> ----- Original Message -----
> From: <Editorgary@aol.com>
> To: <healeys@autox.team.net>
> Sent: Thursday, December 20, 2007 2:02 PM
> Subject: [Healeys] Brake Reservoir Lettering
>
>
>> Painting the brake reservoir lettering with a stencil is far too
>> laborious.
>> Slightly easier is to get a set of rub-on letters in the proper sized
>> "medium
>> helvetica" in white from any good art supply store, cut out the ones
>> you
>> need
>> and position them on scotch-tape, then rub them onto the can.
>> A few years ago someone had made up some rub-on sets that had the right
>> words, but I don't remember who that was or if they're still available.
>> Cheers
>> Gary
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|