Hi Mike,
I've used a few of these tanks with great success and have simply removed
and discarded the nylon ring. The original style cork sending unit gasket is
used with a smear of Hylomar applied to both surfaces and everything
assembled as per usual.
Make sure the tank fitting is the correct thread. If it's not, Jorge may
still be using a standard thread same as is used on GM cars. I believe Doug
Reid (Mr. Finespanner) has sourced out adapters for this.
Rich Chrysler
----- Original Message -----
From: <rrengineer@dslextreme.com>
To: <healeys@autox.team.net>
Sent: Saturday, December 29, 2007 7:03 PM
Subject: [Healeys] Spacer Ring?
>I recently bought an aluminum gas tank for my BN2 restoration from Jorge
> Cevera in Chula Vista near San Diego. He also sells on Ebay. I got a
> much lower price by picking it up directly from Jorge. The tank is very
> nice and my original gas cap fits perfectly. My question is about the
> plastic "spacer ring" that came with the tank. It was attached to the
> tank by the supplied sending unit mounting screws. It is a white plastic
> ring about 1/8th inch thick and looks like it could be some sort of a
> spacer between the tank and the sending unit. Is this thing necessary?
> I have mounted the sending unit without it, but was just wondering what
> the heck it was for.
> Mike MacLean
> 56 BN2
> 60 AN5
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|