Dave Nock did a nice job in giving my 6'6" frame breathing room in my BN1.
We pushed the aft panels back and the floorborad forward. There were some
mods to the pedals/linkages.
Only one downside--if you like using your top--your really can't stow the
top. No big deal 'cause I don't use the top.
JR
----- Original Message -----
From: "T W" <ah3000me@gmail.com>
To: <healeys@autox.team.net>
Sent: Tuesday, August 21, 2007 5:24 PM
Subject: Re: [Healeys] Fw: Leg Room in Healeys
> Is there anything that we can do to move the pedals further forward?
> Any adjustments in the linkages?
>
> - Tom
>
>
> On 8/21/07, pennell@cox.net <pennell@cox.net> wrote:
>> Jerry,
>>
>> The wood shim is a good, quick way to elevate the front of the seats.
>> When I did the resto on my BJ8 and BN7 I made tapered wood strips to
>> replace the factory strips. The strips are the same length but 3/4 in
>> the front tapering down to 1/4 in the back. This gives slightly more leg
>> room but better yet more thigh support.
>>
>> Keith Pennell
>>
>> > Well, so much for my planning in the BJ8 to move the seats back an
>> > inch. I
>> > did put a wood shim in my BN4 tilting the seat back and that made it
>> > more
>> > comfortable.
>> >
>> > Jerry
> _______________________________________________
> rudedoggg@earthlink.net
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|