Is there anything that we can do to move the pedals further forward?
Any adjustments in the linkages?
- Tom
On 8/21/07, pennell@cox.net <pennell@cox.net> wrote:
> Jerry,
>
> The wood shim is a good, quick way to elevate the front of the seats. When I
>did the resto on my BJ8 and BN7 I made tapered wood strips to replace the
>factory strips. The strips are the same length but 3/4 in the front tapering
>down to 1/4 in the back. This gives slightly more leg room but better yet
>more thigh support.
>
> Keith Pennell
>
> > Well, so much for my planning in the BJ8 to move the seats back an inch. I
> > did put a wood shim in my BN4 tilting the seat back and that made it more
> > comfortable.
> >
> > Jerry
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|