Re: Ignition timing - another question or two

healeys

Re: Ignition timing - another question or two

To:	JNBrashear@garverengineers.com, msalter@precisionsportscar.com,
Subject:	Re: Ignition timing - another question or two
From:	Warthodson@aol.com
Date:	Tue, 12 Jun 2007 16:18:14 EDT

Jack,
If you have a timing light (hopefully a dial back to zero type) can you tell 
us the number of degrees of Total advance (with the vacuum advance 
disconnected) at idle (specify the RPM) & at some high RPM such as 3000, 3500 
or 4000?  
 
Also, please verify that the vacuum advance is functioning. I stick a plastic 
tube on the vacuum advance connection & suck. Watch to see if the points 
plate in the distributor rotates under a vacuum. 
Thanks,
Gary

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
RE: Ignition timing - another question or two, Brashear, Jack, N Re: Ignition timing - another question or two, Warthodson <= RE: Ignition timing - another question or two, Freese, Ken Re: Ignition timing - another question or two, bluechip Re: Ignition timing - another question or two, 63AHBJ7 RE: Ignition timing - another question or two, bighealey Re: Ignition timing - another question or two, Earl Kagna Re: Ignition timing - another question or two, Greg Lemon Re: Ignition timing - another question or two, Warthodson Re: Ignition timing - another question or two, Dave Schweninger Re: Ignition timing - another question or two, Dallas Congleton Re: Ignition timing - another question or two, Drtrite

Previous by Date:	RE: Ignition timing - another question or two, Brashear, Jack, N
Next by Date:	RE: Ignition timing - another question or two, Freese, Ken
Previous by Thread:	RE: Ignition timing - another question or two, Brashear, Jack, N
Next by Thread:	RE: Ignition timing - another question or two, Freese, Ken
Indexes:	[Date] [Thread] [Top] [All Lists]