healeys
[Top] [All Lists]

RE: Transmission Tunnel

To: "Patton Dickson" <57healey@gmail.com>
Subject: RE: Transmission Tunnel
From: "Ronald J. Ray" <ronald-ray@sbcglobal.net>
Date: Mon, 12 Feb 2007 13:29:55 -0600
Patton,

The material is foiled faced on both sides.
I used double-backed tape to hold it in place.

Ron Ray

  -----Original Message-----
  From: Patton Dickson [mailto:57healey@gmail.com]
  Sent: Monday, February 12, 2007 1:23 PM
  To: Ronald J. Ray
  Cc: Dan Serrao; healeys@autox.team.net
  Subject: Re: Transmission Tunnel


  Ron,

  Is this sticky sided stuff or did you have to glue this down?

  Patton


  On 2/11/07, Ronald J. Ray <ronald-ray@sbcglobal.net> wrote:
    Dan,

    I used a foiled faced bubble product specifically manufactured for the
    automotive industry called BA820 and manufactured by Reflectic Inc.
    (800-879-3645 Jerry Saunders.)  This product utilizes thicker aluminum
    facers and a thicker core material than what can be found at home
    improvement centers.  As always, no financial or other connections with
the
    manufacturer.


    Ron Ray

    --
    Patton Dickson - http://Austin-Healeys.com

    1957 Austin-Healey 100-Six "Built to run 'til the road wears out."




<Prev in Thread] Current Thread [Next in Thread>